Department of Civil, Construction and Environmental Engineering

 

 

Baolin Wan, Ph.D.
Associate Professor
Civil, Construction and Environmental Engineering

Office Address: 
211 Engineering Hall

Postal Mailing Address: 
Marquette University
P.O. Box 1881 
Milwaukee, WI 53201-1881

Direct Shipping Address: 
Marquette University
211 Engineering Hall

1637 W. Wisconsin Ave

Milwaukee, WI  53233

Contact:
Phone : (414) 288-6684
Fax: (414) 288-7521
E-mail: baolin.wan@marquette.edu


Research Interests:

Numerical and experimental modeling of repaired and retrofitted structures, use of high performance materials (FRP, HPC) in structural members, field testing and nondestructive evaluation of bridges, behavior of reinforced and prestressed concrete structural elements, and finite element analysis.



 

Selected Publications: 

Mohammadi, T., Wan, B. and Dai, J.G., “Modeling of CFRP-Concrete Interface Subjected to Coupled Pull-out and Push-off Actions”, ACI Special Publication SP-275: Fiber-Reinforced Polymer Reinforcement for Concrete Structures, CD-ROM, SP-275-19, 2011, 18 pp.

 

Ouyang, Z. and Wan, B., An Analytical Model of FRP-Concrete Bond Deterioration in Moist Environment, Advances in Structural Engineering, Vol. 12, No. 6, 2009, pp. 761-769.

 

Dai, J., Wan, B., Yokota, H. and Ueda, T., Fracture Criterion for Carbon Fiber Reinforced Polymer Sheet to Concrete Interface Subjected to Coupled Pull-out and Push-off Actions, Advances in Structural Engineering, Vol. 12, No. 5, 2009 pp. 663-682.

 

Ouyang, Z. and Wan, B., Nonlinear Deterioration Model for Bond Interfacial Fracture Energy of FRP-Concrete Joints in Moist Environments, ASCE Journal of Composites for Construction, Vol. 13, No. 1, 2009, pp. 53-63.

 

Foley, C.M., Wan, B. and Liu, J., Wheel Load Distribution in Concrete Bridge Decks with FRP Stay-In-Place Forms, ACI SP-257: FRP Stay-In-Place Forms for Concrete Structures CD-ROM, SP-257-3, 2008, pp. 33-51.

 

Ouyang, Z. and Wan, B., Modeling of Moisture Diffusion in FRP Strengthened Concrete Specimens, ASCE Journal of Composites for Construction, Vol. 12, No. 4, 2008, pp. 425-434.

 

Ouyang, Z. and Wan, B., Experimental and Numerical Study of Moisture Effects on the Bond Fracture Energy of FRP/Concrete Joints, Journal of Reinforced Plastics and Composites, Vol. 27, No. 2, 2008, pp. 205-223.

 

Wan, B., Petrou, M.F. and Harries, K.A., Effect of the Presence of Water on the Durability of Bond Between CFRP and Concrete, Journal of Reinforced Plastics and Composites, Vol. 25, No. 8, 2006, pp. 875-890.

 

Coogler, K., Harries, K.A., Wan, B., Rizos, D.C. and Petrou M.F., “Critical Evaluation of Strain Measurements in Glass Fiber-Reinforced Polymer Bridge Decks,” ASCE Journal of Bridge Engineering, Vol. 10, No. 6, November/December 2005, p704-712.

 

Wan, B., Rizos, D.C., Petrou, M.F. and Harries, K.A., “Computer Simulations and Parametric Studies of GFRP Bridge Deck Systems,” Composite Structures, Vol. 69, No. 1, June 2005, p103-115.

 

Wan, B., Sutton, M., Petrou, M.F., Harries, K.A. and Li, N., “Investigation of Bond between FRP and Concrete Undergoing Global Mode I/II Loading,” ASCE Journal of Engineering Mechanics, Vol. 130, December 2004, p. 1467-1475.

 

Wan, B., Harries, K.A. and Petrou, M.F., “Transfer Length of Strands in Prestressed Concrete Piles,” ACI Structural Journal, Vol. 99, No.5, September-October 2002, p577-585.

 

Sutton, M.A., Wan, B., Petrou, M.F., and Harries, K.A., “Two-Dimensional Computer Vision to Investigate FRP-Concrete Bond Toughness,” Advanced Measurement Methods, Volume 1, May 2002.

 

Wan, B., Petrou, M.F., Harries, K.A. and Hussein, A.A., “’Top Bar’ Effect in Prestressed Concrete Piles,” ACI Structural Journal, Vol. 99, No.2, March-April 2002, p208-214.

 

Petrou, M.F., Wan, B., Joiner, W.S., Trezos, C.G. and Harries, K.A., “Excessive Strand End Slip in Prestessed Piles,” ACI Structural Journal, Vol. 97, No.5, September-October 2000, p774-782.

 

Petrou, M.F., Wan, B., Gadala-Maria, F., Kolli, V.G. and Harries, K.A., “Influence of Mortar Rheology on Aggregate Settlement,” ACI Materials Journal, Vol. 97, No.4, July-August 2000, p479-485.

 

 

©2013 Baolin Wan -- Last Update: February 7, 2003